# Difference between revisions of "Old Numerical Integration"

m (Fix image links) |
m (Update categories) |
||

Line 153: | Line 153: | ||

Based on the stability, accuracy, and performance of these integrators, I believe that the best algorithm for general realtime dynamics simulations is the modified Velocity Verlet algorithm. | Based on the stability, accuracy, and performance of these integrators, I believe that the best algorithm for general realtime dynamics simulations is the modified Velocity Verlet algorithm. | ||

+ | [[Category:Development]] | ||

[[Category:Historical]] | [[Category:Historical]] |

## Latest revision as of 03:59, 1 September 2012

Numerical integration constitutes a broad family of algorithms for calculating the numerical value of a definite integral. This the backbone of physics simulations because it allows calculation of velocity and position from forces (and therefore acceleration) applied to a rigid body.

## Contents

## Criteria

In realtime simulations, the most important integrator criteria are performance, stability, and accuracy. Performance refers to how long it takes to perform the integration for a given timestep. Stability refers to how well the integrator copes with stiff constraints such as high spring constants before errors becomes unacceptably large. Accuracy refers to how well the integrator matches the expected result, and includes whether or not the integrator damps out (loses energy) over time.

## Euler Integration

The Euler method is a first order numerical procedure for solving ordinary differential equations (ODEs) with a given initial value. It is the most basic kind of explicit method for numerical integration for ordinary differential equations. The performance is excellent, but both stability and accuracy are poor. Because it is so simple, it unfortunately gets used very often. Vamos uses Euler integration.

a = acceleration(state, t+dt) x += v*dt v += a*dt

## Newton-Stormer-Verlet (NSV) / Symplectic Euler / Euler–Cromer algorithm

The Euler–Cromer algorithm or symplectic Euler method or Newton-Stormer-Verlet (NSV) method is a modification of the Euler method for solving Hamilton's equations, a system of ordinary differential equations that arises in classical mechanics. It is a symplectic integrator, which is a class of geometric integrators that is especially good at simulations of dynamics and hence it yields much better results than the standard Euler method. The performance is excellent, and stability is fair, and accuracy is excellent. Unbelievably, the algorithm is very simple and almost identical to the Euler method.

a = acceleration(state, t+dt) v += a*dt x += v*dt

## Velocity Verlet

Verlet integration is a numerical integration method originally designed for calculating the trajectories of particles in molecular dynamics simulations. The velocity verlet variant directly calculates velocity. The performance is fair, and both stability and accuracy are excellent.

Unfortunately, calculating the velocity depends on knowing the acceleration for the current iteration, which poses a problem when the acceleration depends on the velocity (such as with a damper). Using the velocity from the last iteration to calculate the acceleration gets around this but may have implications on the accuracy of the method.

if (not oldaccel) oldaccel = acceleration(state, t+dt) x += v*dt + 0.5*oldaccel*dt*dt a = acceleration(state, t+dt) v += 0.5*(a + oldaccel)*dt oldaccel = a

## Runge Kutta 4

The Runge–Kutta methods are an important family of implicit and explicit iterative methods for the approximation of solutions of ordinary differential equations. The Runge Kutta 4 (or RK4) is a well-known 4th-order explicit Runge Kutta algorithm. The code snippet shown below is high level, and the actual implementation is a bit more complicated. Performance is poor, since the acceleration must be evaluated for all objects 4 times per iteration, stability is excellent, and accuracy is fair.

Derivative a = evaluate(state, t) Derivative b = evaluate(state, t, dt*0.5f, a) Derivative c = evaluate(state, t, dt*0.5f, b) Derivative d = evaluate(state, t, dt, c) const float dxdt = 1.0f/6.0f * (a.dx + 2.0f*(b.dx + c.dx) + d.dx) const float dvdt = 1.0f/6.0f * (a.dv + 2.0f*(b.dv + c.dv) + d.dv) state.x = state.x + dxdt*dt state.v = state.v + dvdt*dt

## Detailed Comparison: oscillating spring-mass

For comparing these algorithms I used a simple spring-mass oscillator, because it can be difficult to integrate when the spring is very stiff, but it can be analytically solved easily so I have something to compare the integrators to. In addition, its force calculation depends only on position, which allows the Velocity Verlet algorithm to work as it is commonly used. For this simulation the instantaneous acceleration input into all integrators is calculated as:

a = -k*x/m;

where k is the spring constant, x is the position, and m is the mass.

The analytic solution is calculated as:

A * cos (sqrt(k/m)*t)

where A is the amplitude (and the initial position) and t is the time in seconds.

The constants were set to:

A = 0.5 m = 250.0 dt = 0.1

File:M250a1k200dt01t20.pdf-cropped.png

This is the first simulation, with k set to 200 and run for 20 seconds. The Euler integrator is already unstable, with quickly increasing error as time goes on. All of the other methods are similar for this simulation.

File:M250a1k10000dt01t20.pdf.png

The k constant has been increased to 10,000. At this value all of the non-Euler methods are initially similar, but....

File:M250a1k10000dt01t200.pdf.png

This is the same k constant of 10,000 after ~200 seconds. The RK4 integrator is losing energy, while the NSV and Velocity Verlet methods have amplitudes similar to the exact answer.

File:M250a1k100000dt01t20.pdf.png

The k constant has been increased to 100,000. The NSV integrator is unstable at this level. The RK4 integrator is almost uniformly zero. The only integrator that is still close to the exact value is the Velocity Verlet integrator.

File:M250a1k100000dt01t200.pdf.png

This is the same k constant of 100,000 after ~200 seconds. The Velocity Verlet integrator is doing pretty well here, mostly preserving energy. The RK4 integrator is zero.

File:M250a1k1000000dt01t20.pdf.png

The k constant is now 1,000,000. At this level both the RK4 and Velocity Verlet integrators quickly become unstable.

## Detailed Comparison: spring-mass-damper

For realtime dynamics simulations, damping forces are usually applied. The damping force is proportional to the velocity state, while the spring force is proportional to the position state. Acceleration is calculated as:

a = (-k*x - c*v)/m

where:

c = 2*sqrt(k*m)

The analytic solution for the position is:

(A + B*t)*exp(-w*t)

where:

w = sqrt(k/m); B = vo + w*xo;

The constants were set to:

m = 250.0 A = 1.0 xo = 1.0 vo = 0.0 dt = 0.1

Because the Velocity Verlet algorithm shown above isn't technically correct since due to the damper the acceleration depends on the velocity, a modified Velocity Verlet algorithm was added to the comparison which is purported to give better results for these sorts of cases:

if (not oldaccel) oldaccel = acceleration(state, t+dt) x += v*dt + 0.5*oldaccel*dt*dt v += 0.5*oldaccel*dt a = acceleration(state, t+dt) v += 0.5*a*dt oldaccel = a

File:Damped-m250a1k10000dt01t10.png

Cutting right to the chase, k=10,000 is where the unmodified Velocity Verlet algorithm starts to fall apart. The other integrators are similar, although note that the RK4 solution is right on top of the analytic solution.

File:Damped-m250a1k15000dt01t10.png

Increasing k to 15,000 results in the NSV starting to show major inaccuracies. Surprisingly, the Euler algorithm is still stable and doesn't show the same undesirable behavior as the NSV algorithm.

File:Damped-m250a1k18000dt01t10.png

At k = 18,000, the modified Verlet algorithm becomes unstable and we're left with only the Euler and RK4 algorithms. The Euler algorithm starts to have major error at k = 30,000, and the RK4 does the same at k = 80,000.

## Summary

The results from the spring oscillator and critically damped spring are shown below as rankings for each integrator, with 1 being the best and 4 the worst. The rankings are based on when the method becomes unstable, with accuracy being used as a tie-breaker where necessary.

Method | Oscillating Spring | Critically Damped Spring |
---|---|---|

Euler | 4 | 2 |

NSV | 3 | 4 |

RK4 | 2 | 1 |

Velocity Verlet | 1 | 3 |

It should be noted that for the oscillating spring case, the RK4 integrator resulted in poor accuracy (zero response) while all of the other algorithms except the Euler method were still giving plausible results. Although the RK4 algorithm stayed stable until the same high k values as the Velocity Verlet algorithm, the velocity verlet algorithm's better accuracy at lower k values makes it clearly better for this case.

The performance of the Euler, NSV, and Velocity Verlet integrators is similar, with the Euler and NSV methods resulting in slightly less arithmetic. The RK4 has worse performance and is more complicated. In fact, the RK4 results in 4 evaluations of the acceleration function per timestep. If this function is the performance bottleneck, then the other methods could be run with a smaller timestep (0.25*dt) with similar performance, and with a smaller timestep all methods (except the basic Euler) outperform the RK4 algorithm for both cases.

The RK4 algorithm is very stable, but it comes at a performance and accuracy cost. The RK4 integrator loses energy and requires much more arithmetic. Better stability and accuracy could be achieved at the same performance level by running the Velocity Verlet algorithm with a smaller timestep.

Based on the stability, accuracy, and performance of these integrators, I believe that the best algorithm for general realtime dynamics simulations is the modified Velocity Verlet algorithm.