Difference between revisions of "Old Method of Compiling on Linux"
|Line 1:||Line 1:|
Revision as of 04:56, 6 July 2011
Make sure you have all the required libraries and build tools. Make sure you also have the development files for each of the libraries.
The required build tools include:
- g++ - The GNU C++ compiler
- scons - A replacement for Make
The required libraries include:
- libsdl - Simple Direct Media Layer
- libglew - OpenGL extension utilities
- sdl-gfx - Graphics drawing primitives library for SDL
- sdl-image - Image file loading library for SDL
- vorbisfile - File loading library for the ogg vorbis format
- libvorbis - The Vorbis General Audio Compression Codec
- Boost C++ Libraries (header-file-only)
- ASIO C++ Libraries (header-file-only)
Your Linux distribution may have different package names and/or bundled differently. The list above should give enough information to search for applicable packages within your distribution's package manager.
For Ubuntu, all the required packages may be installed using this command:
sudo apt-get install g++ scons libsdl-gfx1.2-dev libsdl-image1.2-dev libsdl-net1.2-dev libvorbis-dev libglew-dev libasio-dev libboost-dev
For Ubuntu 8.04 you additionally need:
sudo apt-get install libboost-date-time-dev libboost-regex-dev
As of SVN R2358 (2009-06-15 release and later), no steps are required to build bullet and you can continue to the next section.
For the 2009-02-15 release, the only step required is to expand the Bullet source archive:
tar zxvf bullet-2.73-sp1.tgz
|Note: For older versions of VDrift, you will need to follow the Old Method of Compiling Bullet.|
There are two ways to use SCons. The first way is to install scons on your system through your package manager, then you can use it simply by the name of the program, "scons". If you followed the directions for installing prerequisites for Ubuntu above, then you're done and can continue on to the next section. The second way is to use the scons-local package (included with VDrift) which will do the same thing but doesn't require that you install scons on your system. To do this, you must move the scons-local-0.96.95.tar.gz archive from tools to the root vdrift folder, un-tar the archive, and then use the
./scons.py command instead of
Get the Code
You can get the code from a source package for a particular version, or you can get the development version.
Download the latest VDrift Linux source package. All the files in the package are in a directory called vdrift-version-src where version is something like 2009-06-15.
Unpack the archive.
tar jxvf vdrift-2009-06-15-src.tar.bz2
Now change directories into the location of your newly created VDrift source tree.
Optional: Using scons-local instead of installing SCons
If you have decided not to install SCons on your system, you can use scons-local. To set it up, do the following:
tar zxvf tools/scons-local-0.96.1.tar.gz
|Note: Some of the following steps refer to the |
To compile VDrift, just use the
Optional: Compile Options
You can use one or more compile options. To compile with optimization for a certain platform, you can use the arch option.
Compiling VDrift in release mode will turn off debugging options, and enable more compiler optimizations. VDrift runs much more quickly in release mode.
|Note: These options are probably best left off the first time you compile. If you have problems compiling or running VDrift, it is easier to debug with them off. Once you verify that VDrift is compiling, then recompile with these optimizations to improve performance.|
VDrift does not need to be installed to work and you can run it from the folder where you compiled it. If you do want to install, use the SCons build target install. This command must be run as root.
sudo scons install
|Note: The |
sudo cp -r data/* /usr/share/games/vdrift/data
Optional: Installation Location
You can change the installation prefix. For example, if you want VDrift to go in
/usr/local/share/games/vdrift, you can change the prefix setting.
scons install prefix=/usr/local
|Note: There are many more build and install options, see the Using SCons page for more information.|
For release 2009-02-15 and earlier, if you used the default install locations, VDrift can be run with the command:
For release 2009-06-15 and later, if you used the default install locations, VDrift can be run with the command: