# Difference between revisions of "Numerical Integration"

Line 77: | Line 77: | ||

{| cellspacing="0" border="1" | {| cellspacing="0" border="1" | ||

!Method | !Method | ||

− | !Acceleration | + | !Evaluations of the Acceleration Function |

|- | |- | ||

!Euler | !Euler | ||

Line 98: | Line 98: | ||

|} | |} | ||

− | + | Because of the extra evaluations of the acceleration function, the Improved Euler method is about twice as slow as the Euler method, and the RK4 method is about four times as slow as the Euler method. Another way to look at this is that we could run the Euler method with a 0.001 second timestep with the same performance as running the RK4 method with a 0.004 second timestep. | |

− | |||

− | |||

− | |||

− | The | + | ==Detailed comparison== |

− | + | For comparing these algorithms I used a damped spring-mass system because it can be difficult to integrate when the spring is very stiff or the damping is high, but it can be analytically solved so I have something to compare the integrators to. The damping force is proportional to the velocity state, while the spring force is proportional to the position state. Zeta is the damping ratio. The analytic solution can be obtained with the following calculations: | |

− | |||

− | + | real zeta = c / (2.0 * sqrt(k*m)); | |

− | A = 0. | + | real w = sqrt(k/m); |

− | m = | + | |

− | + | if (zeta < 1.0) //underdamped | |

+ | { | ||

+ | real wd = w*sqrt(1.0-zeta*zeta); | ||

+ | |||

+ | real A = ic.x; | ||

+ | real B = (1.0/wd)*(zeta*w*ic.x+ic.v); | ||

+ | real out = (A*cos(wd*time)+B*sin(wd*time))*exp(-zeta*w*time); | ||

+ | return out; | ||

+ | } | ||

+ | else if (zeta > 1.0) //overdamped | ||

+ | { | ||

+ | real beta = c/m; | ||

+ | real rminus = 0.5*(-beta-sqrt(beta*beta-4.0*w*w)); | ||

+ | real rplus = 0.5*(-beta+sqrt(beta*beta-4.0*w*w)); | ||

+ | real A = ic.x - (rminus*ic.x - ic.v)/(rminus-rplus); | ||

+ | real B = (rminus*ic.x-ic.v)/(rminus-rplus); | ||

+ | real out = A*exp(rminus*time)+B*exp(rplus*time); | ||

+ | return out; | ||

+ | } | ||

+ | else //critically damped | ||

+ | { | ||

+ | real A = ic.x; | ||

+ | real B = ic.v + w*ic.x; | ||

+ | |||

+ | return (A + B*time)*exp(-w*time); | ||

+ | } | ||

− | + | The spring constant (k) was fixed at 600,000. Mass was set to 168 kg. Initial conditions were X = 1 m and V = 0 m/s. The damping coefficient was calculated depending on the damping ratio (zeta). The improved Euler method was handicapped with a timestep twice as large as the other methods, and the RK4 method was handicapped with a timestep four times as large as the other methods, due to performance considerations. | |

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | = | ||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− | |||

− |

## Revision as of 11:04, 4 April 2009

Note: the old version of this page is here: Old Numerical Integration

Numerical integration constitutes a broad family of algorithms for calculating the numerical value of a definite integral. This the backbone of physics simulations because it allows calculation of velocity and position from forces (and therefore acceleration) applied to a rigid body.

## Contents

## Criteria

In realtime simulations, the most important integrator criteria are performance, stability, and accuracy. Performance refers to how long it takes to perform the integration for a given timestep. Stability refers to how well the integrator copes with stiff constraints such as high spring constants before errors becomes unacceptably large. Accuracy refers to how well the integrator matches the expected result.

## Integrator Order

The order of a numerical integrator is a convenient way to approximate the accuracy of an integrator. All integrators presented here have an order of at least one, which means that they eventually converge to the correct solution if the timestep is small enough. First order methods converge to the exact solution in a linear relation to the timestep. Higher order methods converge to the correct solution in a power relation to the timestep.

## Euler Integration

The Euler method is a first order numerical procedure for solving ordinary differential equations (ODEs) with a given initial value. It is the most basic explicit method for numerical integration for ordinary differential equations.

real a = system.GetAcceleration(state); state.x += state.v * dt; state.v += a * dt;

## SUVAT

The "suvat" method takes its name from the variables in the equations of motion. This is a first order method that is very similar to the Euler method. The only difference is the addition of an acceleration term to the equation for the change in position.

real a = system.GetAcceleration(state); state.x += state.v * dt + a*dt*dt*0.5; state.v += a * dt;

## Newton-Stormer-Verlet (NSV) / Symplectic Euler / Euler–Cromer algorithm

The Euler–Cromer algorithm or symplectic Euler method or Newton-Stormer-Verlet (NSV) method is a modification of the Euler method for solving Hamilton's equations, a system of ordinary differential equations that arises in classical mechanics. It is a symplectic integrator, which is a class of geometric integrators that is especially good at simulations of systems of undamped oscillators. Due to this property, it preserves energy better than the standard Euler method and so is often used in simulations of orbital mechanics. It is a first order integrator.

real a = system.GetAcceleration(state); state.v += a * dt; state.x += state.v * dt;

## Basic Verlet/Velocity Verlet

Verlet integration is a numerical integration method originally designed for calculating the trajectories of particles in molecular dynamics simulations. The velocity verlet variant directly calculates velocity. It is a second order integrator. Unfortunately, this method is unsuitable for simulations where the acceleration is dependent on velocities, such as with a damper. The modified verlet variant below uses some tricks to try to get around this limitation, but this method will only provide first-order accuracy.

if (!have_oldaccel) oldaccel = system.GetAcceleration(state); state.x += state.v*dt + 0.5*oldaccel*dt*dt; state.v += 0.5*oldaccel*dt; real a = system.GetAcceleration(state); state.v += 0.5*a*dt; oldaccel = a; have_oldaccel = true;

## Improved Euler/Trapezoidal/Bilinear/Predictor-Corrector/Heun

The so-call "Improved Euler" method, also known as the trapezoidal or bilinear or predictor/corrector or Heun Formula method, is a second order integrator.

STATE predictor(state); predictor.x += state.v * dt; predictor.v += system.GetAcceleration(state) * dt; STATE corrector(state); corrector.x += predictor.v * dt; corrector.v += system.GetAcceleration(predictor) * dt; state.x = (predictor.x + corrector.x)*0.5; state.v = (predictor.v + corrector.v)*0.5;

## Runge Kutta 4

The Runge–Kutta methods are an important family of implicit and explicit iterative methods for the approximation of solutions of ordinary differential equations. The Runge Kutta 4 (or RK4) is a well-known fourth-order explicit Runge Kutta algorithm. The code snippet shown below is high level, and the actual implementation is a bit more complicated. Note that the evaluate() function calls the system's acceleration function.

DERIVATIVE a = evaluate(state, 0, DERIVATIVE(), system); DERIVATIVE b = evaluate(state, dt*0.5, a, system); DERIVATIVE c = evaluate(state, dt*0.5, b, system); DERIVATIVE d = evaluate(state, dt, c, system);

const float dxdt = 1.0/6.0 * (a.dx + 2.0*(b.dx + c.dx) + d.dx); const float dvdt = 1.0/6.0 * (a.dv + 2.0*(b.dv + c.dv) + d.dv);

state.x = state.x + dxdt*dt; state.v = state.v + dvdt*dt;

## Performance Comparison

In most simulations, calculation of the system's acceleration function is computationally very expensive. Therefore, we can rank the integrators by how many times they evaluate the system's acceleration function:

Method | Evaluations of the Acceleration Function |
---|---|

Euler | 1 |

SUVAT | 1 |

NSV | 1 |

Modified Verlet | 1 |

Improved Euler | 2 |

RK4 | 4 |

Because of the extra evaluations of the acceleration function, the Improved Euler method is about twice as slow as the Euler method, and the RK4 method is about four times as slow as the Euler method. Another way to look at this is that we could run the Euler method with a 0.001 second timestep with the same performance as running the RK4 method with a 0.004 second timestep.

## Detailed comparison

For comparing these algorithms I used a damped spring-mass system because it can be difficult to integrate when the spring is very stiff or the damping is high, but it can be analytically solved so I have something to compare the integrators to. The damping force is proportional to the velocity state, while the spring force is proportional to the position state. Zeta is the damping ratio. The analytic solution can be obtained with the following calculations:

real zeta = c / (2.0 * sqrt(k*m)); real w = sqrt(k/m); if (zeta < 1.0) //underdamped { real wd = w*sqrt(1.0-zeta*zeta); real A = ic.x; real B = (1.0/wd)*(zeta*w*ic.x+ic.v); real out = (A*cos(wd*time)+B*sin(wd*time))*exp(-zeta*w*time); return out; } else if (zeta > 1.0) //overdamped { real beta = c/m; real rminus = 0.5*(-beta-sqrt(beta*beta-4.0*w*w)); real rplus = 0.5*(-beta+sqrt(beta*beta-4.0*w*w)); real A = ic.x - (rminus*ic.x - ic.v)/(rminus-rplus); real B = (rminus*ic.x-ic.v)/(rminus-rplus); real out = A*exp(rminus*time)+B*exp(rplus*time); return out; } else //critically damped { real A = ic.x; real B = ic.v + w*ic.x; return (A + B*time)*exp(-w*time); }

The spring constant (k) was fixed at 600,000. Mass was set to 168 kg. Initial conditions were X = 1 m and V = 0 m/s. The damping coefficient was calculated depending on the damping ratio (zeta). The improved Euler method was handicapped with a timestep twice as large as the other methods, and the RK4 method was handicapped with a timestep four times as large as the other methods, due to performance considerations.