Difference between revisions of "Setting up force feedback"
From VDrift
m (Update categories) |
|||
| (7 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
Force feedback is currently only supported on Linux. | Force feedback is currently only supported on Linux. | ||
| − | Prerequisites | + | ==Prerequisites== |
* a steering wheel supporting constant force effects (like a Logitech Momo Racing force feedback steering wheel) | * a steering wheel supporting constant force effects (like a Logitech Momo Racing force feedback steering wheel) | ||
* Linux | * Linux | ||
* HID_FF is enabled in your kernel | * HID_FF is enabled in your kernel | ||
| − | * your device's USB ID is in kernel-source/drivers/usb/input/hid-ff.c | + | * your device's USB ID is in '''kernel-source/drivers/usb/input/hid-ff.c''' |
| − | * the ff-utils test program ffcfstress works for you. Note the device name you use with this program (should be /dev/input/eventX). | + | * the ff-utils test program ffcfstress works for you. Note the device name you use with this program (should be '''/dev/input/eventX'''). |
| + | * write permission to '''/dev/input/eventX''' | ||
* VDrift SVN r1547 or later | * VDrift SVN r1547 or later | ||
| − | Once you've met the prerequisites, | + | If you need to recompile your kernel to enable force feedback, you can have a look here [[Enabling force feedback in kernel]] |
| + | |||
| + | ==Enabling force feedback in VDrift== | ||
| + | Once you've met the prerequisites, recompile vdrift like this: | ||
scons force_feedback=1 | scons force_feedback=1 | ||
| − | Now open your VDrift.config. Find the section [ joystick ] and add the following line to the joystick section somewhere: | + | Now open your [[VDrift.config]]. Find the section <code>[ joystick ]</code> and add the following line to the joystick section somewhere: |
ff_device = /dev/input/event0 | ff_device = /dev/input/event0 | ||
| − | + | Change event0 to whatever device you should use (the one that worked with ffcfstress). | |
Start up VDrift. The console will print whether or not force feedback initialization succeeded. Start a practice game. You should feel a force effect on your steering wheel based on the aligning moment force from the front tires. | Start up VDrift. The console will print whether or not force feedback initialization succeeded. Start a practice game. You should feel a force effect on your steering wheel based on the aligning moment force from the front tires. | ||
| + | |||
| + | [[Category:Configuration]] | ||
Latest revision as of 03:26, 1 September 2012
Force feedback is currently only supported on Linux.
Prerequisites
- a steering wheel supporting constant force effects (like a Logitech Momo Racing force feedback steering wheel)
- Linux
- HID_FF is enabled in your kernel
- your device's USB ID is in kernel-source/drivers/usb/input/hid-ff.c
- the ff-utils test program ffcfstress works for you. Note the device name you use with this program (should be /dev/input/eventX).
- write permission to /dev/input/eventX
- VDrift SVN r1547 or later
If you need to recompile your kernel to enable force feedback, you can have a look here Enabling force feedback in kernel
Enabling force feedback in VDrift
Once you've met the prerequisites, recompile vdrift like this:
scons force_feedback=1
Now open your VDrift.config. Find the section [ joystick ] and add the following line to the joystick section somewhere:
ff_device = /dev/input/event0
Change event0 to whatever device you should use (the one that worked with ffcfstress).
Start up VDrift. The console will print whether or not force feedback initialization succeeded. Start a practice game. You should feel a force effect on your steering wheel based on the aligning moment force from the front tires.
